- Automatic Load
- Circular saws
- Electromechanical Press Systems
- Hand Load
- Hand Tools
- Leak Testing Machines
- Polishing Machines
- Sin categoría
- Special Machines
- Tightening Machines
- Verification and Control
Verification and control of threads and air flow. This semi-machine is designed to form part of a robotic machining cell. The robot unloads the part from the machining centre and places it at the
Verification and Control of Fitting of Seal Using Computer Vision The seal is fitted manually on this part and to make sure the seal is not twisted, its location is explored with computer vision.
Rotary transfer machine for pressure fitting of screws, with force and location control with a servo-press. The machine has four stations: Loading station: Loading handling device of palletized belt loading and unloading on index
Special milling machine designed for interior machining. This machine machines the intersection between two cavities so as to ensure that there are no chips or loose material. The machine has two controlled axes, as
Machine For Fitting nozzle connection, with force and location control. It is provided with a Loctite dosage unit for the nozzle connection and also with two lasers for thread control.
Special lathe for rebars Our client turned a section of the rebars for subsequent threading. Turning was performed on a conventional lathe. To improve the cycle time, a special lathe was made where the
Automatic blister loading line. Our client needed to pack their articles in a blister automatically. To this end, an assembly line with trays moving from station to station in a closed circuit was designed.
The rebars of our client needed to be marked by micro-percussion after machining. A system for quick-loading and clamping was designed for adequate marking.
Circular saws to cut the sprue from the crankcase. It has been designed to form part of the cell of the ABB robot that unloads the injector in the same way as on the
Circular saw to cut off sprues and cooling. It is installed in the cell of the robot that removes the parts from the injector. After removal, the robot places the parts in the cooling
Small paper polisher with manual loading and unloading for polishing of camshafts. The polishing arms are interchangeable and adjustable according to the workpiece. Provided with an automatic paper feeding system.
Large paper polisher for large camshafts. The polishing arms system can be removed completely for replacement or maintenance.